Installation Guide

1. Thread two fixture mounting screws through the
mounting strap, then secure them with two lock
nuts. Adjust the length of the fixture mounting
screws if necessary.
2. Attach the mounting strap to the outlet box by
using two mounting screws.
3. Screw the nipple into the coupling of the fixture,
secure it with a washer and hex nut. (You can
adjust the length of the nipple.)
4. Slip the tube, cap-1 with the open side facing
upward, cap-2 with the open side facing
downward, secure them with hex nut.
5. Pull out the outlet wires and the house grounding
wire from the outlet box. Make wire connections
using the wire nuts:
---Connect the black wire from the fixture to the
black wire from the power source.
---Connect the white wire from the fixture to the
white wire from the power source.
---Attach the fixture grounding wire to the mounting
strap with the green grounding screw.
Then connect it to the house grounding wire with
a wire nut.
Carefully put the wires back into the outlet box.
6. Attach the canopy to the mounting strap by inserting
the screws, and secure it with two ball nuts.
7. Install bulbs (not included). See relamping label at socket area or packaging for maximum
allowed wattage.
8. Slip the glass shade and metal pad through the nipple, secure them together with hex nut.
9. Screw the finial into the nipple.
10. Turn on the power at the main fuse or circuit breaker box.
Canopy
Ball Nut
Tube
Coupling
Hex Nut
Nipple
Washer
Cap-1
Glass Shade
Hex Nut
Cap-2
Hex Nut
Fixture Mounting Screw
Metal Pad
Finial
Lock Nut
Outlet Box
Wire Nut
Fixture
Mounting Strap
Green Grounding Screw
House Grounding Wire
Fixture Grounding Wire
Mounting Screw
Fixture Wire
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
C0002 / C0003 / C0004 / C0005 / C0006
120224
Contents of Spare Parts:
Assembly Kit
(1 SET)
(4408MM)
Glass Shade
(1 PC)
(9286LS for C0002)
(9287HR for C0003)
(9285WU for C0004)
(9288FO for C0005)
(9289MO for C0006)
Bulb Type A Max.100W
(not included)