User's Manual

2

1.0 ABBREVIATIONS
The following abbreviations may be used in these notes:
1X 1X operation, with typical max aggregate (up and down) throughput of 7 Mbps
2X 2X operation, with typical max aggregate (up and down) throughput of 14 Mbps
3X 3X operation, with typical max aggregate (up and down) throughput of over 20 Mbps
AP Access Point Module
BH Backhaul Module, either timing master or timing slave
BHM Backhaul Module – timing master
BH Backhaul Module – timing slave
CAP Access Point Module
CIR Committed Information Rate
CMM Cluster Management Module (CMM4 or CMMicro)
CNUT Canopy Network Updater Tool
CSM Subscriber Module
DFS Dynamic Frequency Selection for radar avoidance
DHCP Dynamic Host Configuration Protocol
DiffServ Differentiated Services
EIRP Equivalent Isotropically Radiated Power
ETSI European Telecommunications Standards Institute
FSK Frequency Shift Keying
GPS Global Positioning System
Note: CMM uses GPS to synchronize APs & BHs
MIB Management Information Base for SNMP
NAT Network Address Translation
OFDM Orthogonal Frequency Division Multiplexing
PMP Point-to-Multi-Point (AP to SMs)
PTP Point-to-Point (Backhauls)
QAM Quadrature Amplitude Modulation
QPSK Quadrature Phase Shift Keying
RF Radio Frequency
SM Subscriber Module
VLAN Virtual Local Area Network