User's Manual Part 4
Release8ReferenceInformation
Issue2,November2007 Draft5forRegulatoryReview 500
Important Note: This equipment operates as a secondary application, so it has no rights
against harmful interference, even if generated by similar equipment, and cannot cause
harmful interference on systems operating as primary applications.
36.2.14 AustraliaNotification
900 MHz modules must be set to transmit and receive only on center channels of 920,
922, or 923 MHz so as to stay within the ACMA approved band of 915 MHz to 928 MHz
for the class license and not interfere with other approved users.
After taking into account antenna gain (in dBi), 900 MHz modules’ transmitter output
power (in dBm) must be set to stay within the legal regulatory limit of 30 dBm (1 W) EIRP
for this 900 MHz frequency band.
36.2.15 LabelingandDisclosureTableforChina
The People’s Republic of China requires that Last Mile Gear’s products comply with
China Management Methods (CMM) environmental regulations. (China Management
Methods refers to the regulation Management Methods for Controlling Pollution by
Electronic Information Products.) Two items are used to demonstrate compliance; the
label and the disclosure table.
The label is placed in a customer visible position on the product.
◦ Logo 1 means that the product contains no substances in excess of the maximum
concentration value for materials identified in the China Management Methods
regulation.
◦ Logo 2 means that the product may contain substances in excess of the maximum
concentration value for materials identified in the China Management Methods
regulation, and has an Environmental Friendly Use Period (EFUP) in years, fifty
years in the example shown.
Logo 1
Logo 2
The Environmental Friendly Use Period (EFUP) is the period (in years) during which the
Toxic and Hazardous Substances (T&HS) contained in the Electronic Information Product
(EIP) will not leak or mutate causing environmental pollution or bodily injury from the use
of the EIP. The EFUP indicated by the Logo 2 label applies to a product and all its parts.
Certain field-replaceable parts, such as battery modules, can have a different EFUP and
are marked separately.
The Disclosure Table is intended only to communicate compliance with China
requirements; it is not intended to communicate compliance with EU RoHS or any other
environmental requirements.