User's Manual Part 4
Release8OperationsGuide
Issue2,November2007 Draft5forRegulatoryReview 455
>telnet ModuleIPAddress
/---------\
C A N O P Y
Last Mile Gear Broadband Wireless Technology
Center
(Copyright 2001, 2002 Last Mile Gear Inc.)
Login: root
Password: <password-if-configured>
Telnet +> addwebfile Cyclone.jpg
OR
addwebfile advantaged.jpg
OR
addwebfile top.html
Telnet +> lsweb
Flash Web files
/Cyclone.jpg 7867
free directory entries: 31
free file space: 55331
Telnet +> exit
Figure 166: Example telnet session to activate custom logo file
end of procedure
Procedure 43: Changing the URL of the logo hyperlink
1. In the editor of your choice, create a file named top.html, consisting of one
line:
<a href="myurl">
where myurl is the desired URL, for example, http://www.Cyclonewireless.com.
2. Save and close the file as top.html.
3. Use an FTP (File Transfer Protocol) session to transfer this file to the module, as
in the example session shown in
Figure 165 on Page 454.
4. Use a telnet session and the addwebfile command to add the new file (top.html)
to the file system, as in the example session shown in Figure 166.
end of procedure
If you ever want to restore the original logo and hyperlink in a module, perform the
following steps.
Procedure 44: Returning a module to its original logo and hyperlink
1. Use a telnet session and the clearwebfile command to clear all custom files from
the file system of the module, as in the example session shown in
Figure 167