User's Manual Part 4

Release8OperationsGuide


Issue2,November2007 Draft5forRegulatoryReview 483
Network Scenario for this issue:
(ID those that apply)
SM to Subscriber PC
Yes/No
SM to AP (Point to Multipoint)
Yes/No
BHM to BHS (Point to Point)
Yes/No
20Meg or 10Meg backhaul
Yes/No
Link Distance:
dBm=
Jitter=
Reflectors in use:
Yes/No
NAT/DHCP Scenario:
NAT Disabled
Yes/No
NAT with DHCP Client and DHCP
Server
Yes/No
NAT with DHCP Client
Yes/No
NAT with DHCP Server
Yes/No
NAT with no DHCP
Yes/No
Problem Description:
New Install: Yes/No
NAT/DHCP Scenario:
NAT Disabled
Yes/No
NAT with DHCP Client and
DHCP
Server
Yes/No
NAT with DHCP Client
Yes/No
NAT with DHCP Server
Yes/No
NAT with no DHCP
Yes/No
11. Save your basic site information as file Site_Info.
12. From among
Figure 28 on Page 103, Figure 29 on Page 104, and Figure 30 on
Page
104, select the basic network topology diagram that most closely matches
your network configuration.
13. If you selected Figure 28.
a. Indicate how many APs are in each cluster.
b. Indicate how many AP clusters are deployed (and what types).
c. Include the IP addresses.
d. Indicate the frequency for each sector.
e. Indicate the type of synchronization.
f. Indicate how much separation exists between clusters.
g. For each AP collect the following additional information:
• Sector number:
• SW release:
• Frequency:
• Color code: