User's Manual Part 4

Release8OperationsGuide


Issue2,November2007 Draft5forRegulatoryReview 473
Figure 178: NAT Table tab of SM, example
b. verify that the correct NAT translations are listed.
RESULT: NAT is eliminated as a possible cause if these translations are
correct.
5. If this SM is configured for NAT with DHCP, then at the SM
a. execute ipconfig.
b. verify that the PC has an assigned IP address.
c. if the PC does not have an assigned IP address, then
• enter ipconfig /release “Adapter Name”.
• enter ipconfig /renew “Adapter Name”.
• reboot the PC.
• retreat to Step 5a.
d. if the PC has an assigned IP address, then
• access the NAT DHCP Statistics tab in the Statistics web page of
the SM.
NOTE: An example of this tab is shown in
Figure 179.