User's Manual Part 3

Release8OperationsGuide


Issue2,November2007 Draft5forRegula toryReview 398
AP, SM, BH
Object Name
Value Syntax
Operation
Allowed
whispBridgeTbFree Integer monitor
whispBridgeTbUsed Integer monitor
whispVAge Integer monitor
whispVID Integer monitor
whispVType DisplayString monitor
NOTES:
1. For only 5.7-GHz radios.
2. Where
n is any number, 0 through 63. codePoint0,
codePoint48, and codePoint56 can be only monitored.
3. Deprecated.
4. Replaced by frameType.
5. Where
n is any number, 1 through 10.
6. The value of this object
does not accurately reflect the
temperature inside the module for comparison with the
operating range. However, it can be helpful as one of many
troubleshooting indicators. Although modules no longer
report the Temperature field in the GUI, the agent in the
modules continues to support this object.
24.4.2 APandBHTimingMasterObjects
The objects that the Cyclone Enterprise MIB defines for each AP and BH Timing Master
are listed in Table 59. The traps provided in this set of objects are listed under Traps
Provided in the Cyclone Enterprise MIB on Page 410.
Table 59: Cyclone Enterprise MIB objects for APs and BH timing masters
AP, BHM
Object Name
Value Syntax
Operation
Allowed
allowedIPAccess1 IpAddress manage
allowedIPAccess2 IpAddress manage
allowedIPAccess3 IpAddress manage
apBeaconInfo Integer manage
apTwoXRate Integer manage
asIP1 IpAddress manage
asIP2 IpAddress manage
asIP3 IpAddress manage
authKey DisplayString manage
authMode Integer manage
configSource Integer manage
dAcksReservHigh Integer manage