User's Manual Part 3

Release8OperationsGuide


Issue2,November2007 Draft5forRegula toryReview 394
Objects in
category… Control or identify the status of…
tcp
Transport Control Protocol information in the module (to control
and ensure the flow of data on the Internet).
udp
User Datagram Protocol information in the module (for checksum
and address).
24.2.4 CycloneEnterpriseMIB
The Cyclone Enterprise MIB provides additional reporting and control, extending the
objects for any NMS that uses SNMP interaction. This MIB comprises five text files that
are formatted in standard ASN.1 (Abstract Syntax Notation One) language.
To use this MIB, perform the following steps.
Procedure 39: Installing the Cyclone Enterprise MIB files
1. On the NMS, immediately beneath the root directory, create directory
mibviewer.
2. Immediately beneath the mibviewer directory, create directory Cyclonemibs.
3. Download the following three standard MIB files from the Internet Engineering
Task Force at http://www.simpleweb.org/ietf/mibs
into the
mibviewer/Cyclonemibs directory on the NMS:
• SNMPv2-SMI.txt, which defines the Structure of Management Information
specifications.
• SNMPv2-CONF.txt, which allows macros to be defined for object group,
notification group, module compliance, and agent capabilities.
• SNMPv2-TC.txt, which defines general textual conventions.
4. Move the following five files from your Cyclone software package directory into
the mibviewer/Cyclonemibs directory on the NMS (if necessary, first
download the software package from http://www.Last Mile Gear.com/Cyclone
):
• whisp-tcv2-mib.txt (Textual Conventions MIB), which defines Cyclone
system-specific textual conventions
• WHISP-GLOBAL-REG-MIB.txt (Registrations MIB), which defines
registrations for global items such as product identities and product
components.
• WHISP-BOX-MIBV2-MIB.txt (Box MIB), which defines module-level (AP,
SM, and BH) objects.
• WHISP-APS-MIB.txt (APs MIB), which defines objects that are specific to
the AP or BH timing master.
• WHISP-SM-MIB.txt (SM MIB), which defines objects that are specific to
the SM or BH timing slave.
• CMM3-MIB.txt (CMM3 MIB), which defines objects that are specific to the
CMMmicro.