User's Manual Part 3

Release8OperationsGuide


Issue2,November2007 Draft5forRegula toryReview 379
Figure 139: Add User tab of SM, example
After a password has been set for any ADMINISTRATOR-level account, initial access to
the module GUI opens the view of GUEST level (Figure 138).
Accounts that cannot be deleted are
◦ the current user's own account.
◦ the last remaining account of ADMINISTRATOR level.
22.3.2 OverridingForgottenIPAddressesorPasswordsonAP,SM,orBH 
Cyclone systems offer a plug that allows you to temporarily override some AP/SM/BH
settings and thereby regain control of the module. This plug is needed for access to the
module in any of the following cases:
• You have forgotten either
• the IP address assigned to the module.
• the password that provides access to the module.
• The module has been locked by the No Remote Access feature. (See Denying
All Remote Access on Page 457 and Reinstating Remote Access Capability on
Page 457.)
• You want local access to a module that has had the 802.3 link disabled in the
Configuration page.