User's Manual Part 3
Release8InstallationandConfigurationGuide
Issue2,November2007 Draft5forRegula toryReview 339
6. Slide the lock washers (provided) onto the U-bolts.
7. Use the nuts (provided) to securely fasten the bracket to the U-bolts.
end of procedure
Figure 121: Detail of GPS antenna mounting
19.4.1 RecommendedMaterialsforCablingtheGPSAntenna
The following materials are required for cabling the GPS antenna:
• up to 100 feet (30.4 meters) of LMR200 coaxial cable
• 2 Times Microwave N-male connectors (Times Microwave P/N TC-200-NM) or
equivalent connectors.
19.4.2 CablingtheGPSAntenna
Connect the GPS coax cable to the female N-connector on the GPS antenna.
19.5 INSTALLINGACMM2
Ensure that you comply with standard local or national electrical and climbing procedures
when you install the CMM2.
19.5.1 CMM2InstallationTemperatureRange
Install the CMM2 outside only when temperatures are above –4° F (–20° C). The
bulkhead connector and the bushings and inserts in the bulkhead connector are rated for
the full –40° to +131° F (–40° to +55° C) range of the CMM2. However, for dynamic
operations (loosening, tightening, and inserting), they are compliant at, and rated for, only
temperatures at or above –4° F (–20° C).