User's Manual Part 3
Release8InstallationandConfigurationGuide
Issue2,November2007 Draft5forRegulatoryReview 323
18.5.4 SNMPTaboftheBHS
An example of the SNMP tab in a BHS is displayed in Figure 110.
Figure 110: SNMP tab of BHS, example
In the SNMP tab of the BHS, you may set the following parameters.
Community String
Specify a control string that allows Prizm or an NMS (Network Management Station) to
access MIB information about this BHS. No spaces are allowed in this string. The default
string is Cyclone.