User's Manual Part 3
Release8OperationsGuide
Issue2,November2007 Draft5forRegula toryReview 449
16. When they are within 150 time bits, access the Radio tab in the Configuration
web page of each AP in the cluster and change its Downlink Data parameter
(percentage) to the last value that you used in the Frame Calculator.
See Figure 77: Radio tab of AP (900 MHz), example on Page 243.
end of procedure
27.6 USINGTHESMCONFIGURATIONTOOL(AP,BHM)
The SM Configuration tab in the Tools page of the AP or BHM displays
◦ the current values whose control may be subject to the setting in the
Configuration Source parameter.
◦ an indicator of the source for each value.
An example of the SM Configuration tab is displayed in Figure 163.
Figure 163: SM Configuration tab of AP, example