User's Manual Part 3

Release8OperationsGuide


Issue2,November2007 Draft5forRegula toryReview 443
TxBER
A 1 in this field indicates the AP or BHM is sending Radio BER.
EBcast
A 1 in this field indicates the AP or BHM is encrypting broadcasst packets. A 0 indicates it
is not.
Session Count
This field displays how many sessions the SM (or BHS) has had with the AP (or BHM).
Typically, this is the sum of Reg Count and Re-Reg Count. However, the result of internal
calculation may display here as a value that slightly differs from the sum.
In the case of a multipoint link, if the number of sessions is significantly greater than the
number for other SMs, then this may indicate a link problem or an interference problem.
NoLUIDs
OutOfRange
AuthFail
This field displays how many times authentication attempts from this SM have failed in
the AP.
EncryptFail
This field displays how many times an encryption mismatch has occurred between
the SM and the AP.
Rescan Req
FrameNumber
Sector ID
This field displays the value of the Sector ID field that is provisioned for the AP or BHM.
Color Code
This field displays the value of the Color Code field that is provisioned for the AP or
BHM.
BeaconVersion
Sector User Count
This field displays how many SMs are registered on the AP.
Frequency
This field displays the frequency of the received signal, expressed in MHz.
NumULHalfSlots
This is the number of uplink half slots in this AP or BHM’s frame. To get slots, just divide
by 2.