User's Manual Part 3
Release8OperationsGuide
Issue2,November2007 Draft5forRegula toryReview 439
Figure 159: Link Capacity Test tab with 64-byte packet length, example
To test a link, perform the following steps.
Procedure 40: Performing a Link Capacity Test
1. Access the Link Capacity Test tab in the Tools web page of the module.
2. If you are running this test from an AP
a. and you want to see Maximum Information Rate (MIR) data for the SM
whose link you will be testing, then perform the following steps:
(1) For Link Test with MIR, select Enabled.
(2) Click the Save Changes button.
(3) Click the Reboot button.
b. use the drop-down list to select the SM whose link you want to test.