User's Manual Part 3
Release8OperationsGuide
Issue2,November2007 Draft5forRegula toryReview 424
26.9 TRANSLATIONTABLE(SM)
When Translation Bridging is enabled in the AP, each SM keeps a table mapping MAC
addresses of devices attached to the AP to IP addresses, as otherwise the mapping of
end-user MAC addresses to IP addresses is lost. (When Translation Bridging is enabled,
an AP modifies all uplink traffic originating from registered SM’s such that the source
MAC address of every packet will be changed to that of the SM which bridged the packet
in the uplink direction.)
An example of the Translaton Table is displayed in Figure 149.
Figure 149: Translation Table tab of SM, example
26.10 INTERPRETINGDATAINTHEETHERNETTAB(ALL)
The Ethernet tab of the Statistics web page reports TCP throughput and error information
for the Ethernet connection of the module.