User's Manual Part 3

Release8OperationsGuide


Issue2,November2007 Draft5forRegula toryReview 409
Object Name Value Syntax
Operation
Allowed
receiveChannel Integer manage
transmitChannel Integer manage
receiveModulationMode Integer manage
transmitModulationMode Integer manage
receiveSnr
2
Integer manage
systemReset Integer monitor
softwareVersion DisplayString monitor
hardwareVersion DisplayString monitor
NOTES:
1. Of the other BH in the link.
2.
max, mean, min, last during the past hour.
24.6 OBJECTSSUPPORTEDINTHECYCLONE30/60‐MbpsBH
The 30/60-Mbps BH supports the following MIBs:
◦ MIB II, RFC 1213, System Group
◦ MIB II, RFC 1213, Interfaces Group
◦ WiMAX 802.16 WMAN-IF-MIB
◦ Bridge MIB, RFC 1493, dot1dBaseGroup
◦ Bridge MIB, RFC 1493, dot1dBasePortTableGroup
◦ 30/60-Mbps Backhaul Cyclone proprietary MIB
24.7 OBJECTSSUPPORTEDINTHECYCLONE150/300‐MbpsBH
The 150/300-Mbps BH supports the following MIBs:
◦ MIB II, RFC 1213, System Group
◦ MIB II, RFC 1213, Interfaces Group
◦ WiMAX 802.16 WMAN-IF-MIB
◦ Bridge MIB, RFC 1493, dot1dBaseGroup
◦ Bridge MIB, RFC 1493, dot1dBasePortTableGroup
◦ High-capacity counter MIB, RFC 2233
◦ 150/300-Mbps Backhaul Cyclone proprietary MIB
24.8 INTERFACEDESIGNATIONSINSNMP
SNMP identifies the ports of the module as follows:
• Interface 1 represents the Ethernet interface of the module. To monitor the status
of Interface 1 is to monitor the traffic on the Ethernet interface.