User's Manual Part 2

Release8InstallationandConfigurationGuide


Issue2,November2007 Draft5forRegulatoryReview 241
Save Changes
When you click this button, any changes that you made on the this tab are recorded in
flash memory. However, these changes do not apply until the next reboot of the module.
Reboot
When you click this button
1. the module reboots.
2. any changes that you saved by a click of the Save Changes button are
implemented.
18.1.2 IPTaboftheAP
An example of the IP tab of the AP is displayed in Figure 76.
Figure 76: IP tab of AP, example