User's Manual Part 2
Release8InstallationandConfigurationGuide
Issue2,November2007 Draft5forRegulatoryReview 226
The Configuration web page contains all of the configurable parameters that define how
the CMMmicro operates. The first line of information on the Configuration screen echoes
the Device Type from the Status web page.
IMPORTANT!
Changes that are made to the following parameters become effective when you
click the Save Changes button:
• Port Configuration
• Description
• Power Port Control
• Webpage Auto Update
When these parameters listed above have become effective, if you click the
Undo Saved Changes button, the previous values
are not restored.
Changes that are made to all other parameters become effective only after all of the
following have occurred:
• you have clicked the Save Changes button.
• you click the Reboot button.
• the CMMmicro reboots.
Procedure 18: Setting CMMmicro parameters for test
To continue the test setup, configure
1. the GPS Timing Pulse parameter.
2. the Lan1 IP parameter.
3. the Lan1 Subnet Mask parameter.
4. the Default Gateway parameter.
5. the Port Power Control parameter.
end of procedure
GPS Timing Pulse
Select Master. (Slave is for future use.)
IMPORTANT!
If the GPS Timing Pulse is set to Slave, the CMMmicro GPS receiver is disabled.