User's Manual Part 2
Release8InstallationandConfigurationGuide
Issue2,November2007 Draft5forRegulatoryReview 222
16.5.2 StatusPageoftheCMMmicro
An example of a CMMmicro Status page is displayed in Figure 71.
Figure 71: Status page of CMMmicro, example
The Status page provides information on the operation of this CMMmicro. This is the
default web page for the CMMmicro. The Status page provides the following fields.
Link
A red dot indicates that the port is active and detects Ethernet traffic. A grey dot indicates
that the port is not active and no traffic is detected.
100BaseT
A red dot indicates that the port has auto-negotiated to a 100Base-T connection. A grey
dot indicates that the port has auto-negotiated to a 10Base-T connection. (This
convention is also used on many routers and network interface cards.) If the far end
(an AP, a BH, a router) has been set to auto-negotiate, then the CMMmicro links at
100Base-T.
Full Duplex
A red dot indicates that the port has auto-negotiated to a Full Duplex connection. A grey
dot indicates that the port has auto-negotiated to a Half Duplex connection. (This
convention is also used on many routers and network interface cards.)