User's Manual Part 2
Release8InstallationandConfigurationGuide
Issue2,November2007 Draft5forRegulatoryReview 211
16.4.3 BeginningtheTestofPoint‐to‐PointLinks
To begin the test of your BH link, in the Remote Subscribers tab of the BHM, click the link
to the BHS. The BHS GUI opens to the General Status tab of its Home page.
An example of the BHS General Status tab is displayed in Figure 65.
Figure 65: General Status tab of BHS, example
The General Status tab provides information on the operation of this BHS. This is the tab
that opens by default when you access the GUI of the BHS. The General Status tab
provides the following read-only fields.
Device Type
This field indicates the type of the Cyclone module. Values include the frequency band of
the BHS, its module type, and its MAC address.
Software Version
This field indicates the Cyclone system release, the time and date of the release, the
modulation rate, and whether communications involving the module are secured by DES
or AES encryption (see Encrypting Cyclone Radio Transmissions on Page 375). If you
request technical support, provide the information from this field.