User's Manual Part 2

Release8InstallationandConfigurationGuide


Issue2,November2007 Draft5forRegulatoryReview 189
Figure 55: LAN IP Address tab of AP, example
6. At the bottom of this tab, either
• specify an IP Address, a Subnet Mask, and a Gateway IP Address for
management of the AP and leave the DHCP state set to Disabled.
• set the DHCP state to Enabled to have the IP address, subnet mask, and
gateway IP address automatically configured by a domain name server
(DNS).
7. Click the Go To Next Page => button.
RESULT:The AP responds by opening the Review and Save Configuration tab.
An example of this tab is shown in Figure 56.