User's Manual Part 2
Release8InstallationandConfigurationGuide
Issue2,November2007 Draft5forRegulatoryReview 300
Update Application Address
For capabilities in future software releases, you can enter the address of the server to
access for software updates on this BHM.
2X Rate
See 2X Operation on Page 90.
Prioritize TCP ACK
To reduce the likelihood of TCP acknowledgement packets being dropped, set this
parameter to Enabled. This can improve throughput that the end user perceives during
transient periods of congestion on the link that is carrying acknowledgements. See AP-
SM Links on Page 99.
The General tab of the BHM also provides the following buttons.
Save Changes
When you click this button, any changes that you made on the Configuration page are
recorded in flash memory. However, these changes do not apply until the next reboot of
the module.
Reboot
When you click this button
1. the module reboots.
2. any changes that you saved by a click of the Save Changes button are
implemented.