User's Manual Part 2
Release8InstallationandConfigurationGuide
Issue2,November2007 Draft5forRegulatoryReview 290
In the VLAN Membership tab, you may set the following parameter.
VLAN Membership Table Configuration
For each VLAN in which you want the AP to be a member, enter the VLAN ID and then
click the Add Member button. Similarly, for any VLAN in which you want the AP to no
longer be a member, enter the VLAN ID and then click the Remove Member button.
18.2.10 DiffServeTaboftheSM
An example of the DiffServe tab in an SM is displayed in Figure 96.
Figure 96: DiffServe tab of SM, example