User's Manual Part 2
Release8InstallationandConfigurationGuide
Issue2,November2007 Draft5forRegulatoryReview 284
Hi Priority Downlink CIR
See
◦ High-priority Bandwidth on Page 86
◦ Committed Information Rate on Page 86
◦ Setting the Configuration Source on Page 295.
The Quality of Service (QoS) tab also provides the following buttons.
Save Changes
When you click this button, any changes that you made in this tab are recorded in flash
memory. However, these changes do not apply until the next reboot of the module.
Reboot
When you click this button
1. the module reboots.
2. any changes that you saved by a click of the Save Changes button are
implemented.