User's Manual Part 2

Release8InstallationandConfigurationGuide


Issue2,November2007 Draft5forRegulatoryReview 283
Uplink Burst Allocation
Specify the maximum amount of data to allow this SM to transmit before being recharged
at the Sustained Uplink Data Rate with credits to transmit more. See
◦ Maximum Information Rate (MIR) Parameters on Page 84
◦ Interaction of Burst Allocation and Sustained Data Rate Settings on Page 86
◦ Setting the Configuration Source on Page 295.
Downlink Burst Allocation
Specify the maximum amount of data to allow the AP to transmit to this SM before the AP
is replenished at the Sustained Downlink Data Rate with transmission credits. See
◦ Maximum Information Rate (MIR) Parameters on Page 84
◦ Interaction of Burst Allocation and Sustained Data Rate Settings on Page 86
◦ Setting the Configuration Source on Page 295.
Low Priority Uplink CIR
See
◦ Committed Information Rate on Page 86
◦ Setting the Configuration Source on Page 295.
Low Priority Downlink CIR
See
◦ Committed Information Rate on Page 86
◦ Setting the Configuration Source on Page 295.
Hi Priority Channel
See
◦ High-priority Bandwidth on Page 86
◦ Setting the Configuration Source on Page 295.
Hi Priority Uplink CIR
See
◦ High-priority Bandwidth on Page 86
◦ Committed Information Rate on Page 86
◦ Setting the Configuration Source on Page 295.