Manualshelf

User's Manual Part 2

ManualsBrandsCascade Networks ManualsElectronicsMotorola Canopy compatible Wireless Internet Acces
111112113114115116117118119120
Release8InstallationandConfigurationGuide
Issue2,November2007 Draft5forRegulatoryReview 267
NAT Enable/Disable
This parameter enables or disabled the Network Address Translation (NAT) feature for
the SM. NAT isolates devices connected to the Ethernet/wired side of an SM from being
seen directly from the wireless side of the SM. With NAT enabled, the SM has an IP
address for transport traffic separate from its address for management, terminates
transport traffic, and allows you to assign a range of IP addresses to devices that are
connected to the Ethernet/wired side of the SM. For further information, see Network
Address Translation (NAT) on Page 156 and NAT and IP Tabs of the SM with NAT
Enabled on Page 271.
NAT Private Network Interface Configuration, IP Address
This parameter is not configurable when NAT is disabled.
NAT Private Network Interface Configuration, Subnet Mask
This parameter is not configurable when NAT is disabled.
DMZ Host Interface Configuration, IP Address
This parameter is not configurable when NAT is disabled.
DMZ Enable
This parameter is not configurable when NAT is disabled.
NAT Public Network Interface Configuration, IP Address
This field displays the IP address for the SM. DHCP Server will not automatically assign
this address when NAT is disabled.
NAT Public Network Interface Configuration, Subnet Mask
This field displays the subnet mask for the SM. DHCP Server will not automatically
assign this address when NAT is disabled.
NAT Public Network Interface Configuration, Gateway IP Address
This field displays the gateway IP address for the SM. DHCP Server will not automatically
assign this address when NAT is disabled.
DHCP Start IP
This parameter is not configurable when NAT is disabled.
Number of IPs to Lease
This parameter is not configurable when NAT is disabled.
Radio Public Network Interface Configuration, IP Address
This parameter is not configurable when NAT is disabled.
Radio Public Network Interface Configuration, Interface Enable/Disable
This parameter is not configurable when NAT is disabled.
Radio Public Network Interface Configuration, Subnet Mask
This parameter is not configurable when NAT is disabled.
Radio Public Network Interface Configuration, Gateway IP Address
This parameter is not configurable when NAT is disabled.