User's Manual Part 2

Release8InstallationandConfigurationGuide


Issue2,November2007 Draft5forRegulatoryReview 263
18.2.1 GeneralTaboftheSM
An example of a General tab in the SM is displayed in Figure 85.
Figure 85: General tab of SM, example
In the General tab of the SM, you may set the following parameters.
Link Speeds
Specify the type of link speed for the Ethernet connection. The default for this parameter
is that all speeds are selected. The recommended setting is a single speed selection for
all APs, BHs, and SMs in the operator network.