Manualshelf

User's Manual Part 2

ManualsBrandsCascade Networks ManualsElectronicsMotorola Canopy compatible Wireless Internet Acces
101102103104105106107108109110
Release8InstallationandConfigurationGuide
Issue2,November2007 Draft5forRegulatoryReview 255
Allowed Source IP 1 to 3
If you selected IP Access Filtering Enabled for the IP Access Control parameter, then
you must populate at least one of the three Allowed Source IP parameters or have no
access permitted to the AP from any IP address. You may populate as many as all three.
If you selected IP Access Filtering Disabled for the IP Access Control parameter, then
no entries in this parameter are read, and access from all IP addresses is permitted.
The Security tab of the AP also provides the following buttons.
Save Changes
When you click this button, any changes that you made on this tab are recorded in flash
memory. However, these changes do not apply until the next reboot of the module.
Reboot
When you click this button
1. the module reboots.
2. any changes that you saved by a click of the Save Changes button are
implemented.