User's Manual Part 1
Release8OverviewofCycloneNetworks
Issue2,November2007 Draft5forRegulatoryReview 97
CMM
BH
-M-
AP
BH
-S-
SM
SM
2
1
3
4
4
Figure 27: Additional link to extend network sync, Design 5
Wiring and configuration information for this sync extension is described under
Wiring to
Extend Network Sync
on Page 374.
All Cyclone radios support the remote AP functionality. The BHS and the SM can reliably
pass the sync pulse, and the BHM and AP can reliably receive it. The sync is passed in a
cable that connects Pins 1 and 6 of the RJ-11 timing ports of the two modules. (The sync
cable is described under
Cables on Page 57.) When you connect modules in this way,
you must also adjust configuration parameters to ensure that
◦ the AP is set to properly receive sync.
◦ the SM will not propagate sync to the AP if the SM itself ceases to receive sync.