User's Manual Part 1
Release8OverviewofCycloneNetworks
Issue2,November2007 Draft5forRegulatoryReview 65
• polarization—vertical or horizontal
• cable—12-inch (30.5 cm)
• connector—female N-type
• beamwidth—approximately 60° vertical and 60° horizontal at 3 dBm
Last Mile Gear has certified three other antennas, which are available through Cyclone
resellers. The attributes of one of these other certified antennas include
• gain—10 dBi
• dimensions—12 x12 x 1 inches (30.5 x 30.5 x 2.5 cm)
• weight—3.3 lbs (1.5 kg)
• polarization—vertical or horizontal
• connector—female N-type
• beamwidth—approximately 60° vertical and 60° horizontal at 3 dBm
Examples of these antennas are pictured in
Figure 6 on Page 52.
5.4.2 Third‐partyCertifiedConnectorizedFlatPanelAntenna
A third party may certify additional antennas for use with the Cyclone connectorized
900-MHz module.
5.5 ADJUNCTIVESOFTWAREPRODUCTS
The capabilities of available applications and tools are summarized for comparison in
Table 16. In this table CNUT represents Cyclone Network Updater Tool, Release 1.1 or
later, and BAM represents Bandwidth and Authentication Manager, Release 2.0 or later.
Table 16: Cyclone applications and tools
Capability
Application or Tool
Prizm
CNUT
BAM
authenticates SMs
●
●
controls authentication in APs
● ●
manages Committed Information Rate (CIR)
●
●
has dependency on another application
3
●
automatically discovers elements
● ●
exports network information with hierarchy
● ●
supports user-defined folder-based operations
● ●
senses FPGA version on an element
● ●
upgrades FPGA version on an element
●
enables/disables hardware scheduling
●