User's Manual Part 1
Release8OverviewofCycloneNetworks
Issue2,November2007 Draft5forRegulatoryReview 64
Characteristic CMM2 CMMmicro
Data throughput auto-negotiates to full or half duplex auto-negotiates to full or half duplex
Ethernet operating
speed standard
auto-negotiates to 10Base-T or
100Base-TX
auto-negotiates to 10Base-T or
100Base-TX
Additional Ethernet
ports
one for data feed
one for local access
(notebook computer)
none
Power supply
integrated 24-V DC to power APs,
BHs, and GPS receiver
external 24-V DC to power APs, BHs,
and GPS receiver
SNMP management
capability
none provided
Sync (to prevent
self-interference)
carried by the additional serial cable
to each AP and BHM
embedded in power-over-Ethernet
cable
Time & Date
carried by the additional serial cable
to each AP and BHM
provided by NTP (Network Time
Protocol). CMMmicro can be an NTP
server.
Weatherized enclosure and power supply
only the enclosure (not the power
supply)
Web interface none
web pages for status, configuration,
GPS status, and other purposes
NOTE:
Auto-negotiation of data throughput and Ethernet operating speed depend on the connected device
being set to auto-negotiate as well.
5.4 ANTENNASFORCONNECTIONTO900‐MHzMODULES
Like the 2.4-, 5.2-, 5.4-, and 5.7-GHz module, the 900-MHz connectorized module has
◦ the same housing.
◦ a covered Ethernet port.
◦ a utility port for alignment headset, sync cable to CMM2, or override plug.
The 900-MHz AP or SM is available either
◦ as a connectorized unit with a 16-inch (approximately 40-cm) cable with a male
N-type connector for connection to the antenna.
◦ with an integrated horizontally-polarized antenna in a different form factor.
5.4.1 CertifiedConnectorizedFlatPanelAntennas
Last Mile Gear has certified four connectorized flat panel antenna options. Last Mile Gear
resells one of these, whose attributes include
• gain—10 dBi
• dimensions—8.8 x 8.1 x 1.6 inches (22.4 x 20.6 x 4.06 cm)
• weight—1.2 lbs (0.54 kg)