User's Manual Part 1

Release8OverviewofCycloneNetworks



Issue2,November2007 Draft5forRegulatoryReview 61
Product
Frequency Band Range
900
MHz
2.4 GHz 5.1 GHz 5.2 GHz 5.4 GHz 5.7 GHz
5.4 GHz
OFDM
CMM2 ● ● ● ● ● ●
CMMmicro ● ● ● ● ● ● ●
Power supply ● ● ● ● ● ● ●
Surge suppressor ● ● ● ● ● ● ●
NOTES:
1. National or regional regulations may limit EIRP to the same as without a reflector, and therefore
require Transmit Output Power to be reduced. In these cases
• the reflector used with an SM reduces beamwidth to reduce interference, but does not increase
the range of the link.
• the reflector on both ends of a BH link reduces beamwidth to reduce interference and also
increases the range of the link.
5.3.2 LinkPerformanceandEncryptionComparisons
Encryption options are summarized in
Table 12. Typical Line-of-Site (LOS) range and
aggregate useful throughput for Cyclone PTMP links are summarized in
Table 13. Typical
Line-of-Site (LOS) range and aggregate useful throughput for Cyclone PTP links are
summarized in
Table 14.
Table 12: Products with encryption options available per frequency band, PTMP links
Frequency Band
Products available with the following
encryption options
DES or none AES or none
900 MHz
● ●
2.4 GHz @100 mW
(ETSI)
● ●
2.4 GHz @ 1W
● ●
5.1 GHz
●
5.2 GHz
● ●
5.4 GHz
● ●
5.7 GHz
● ●
5.4 GHz OFDM ●