User's Manual Part 1


 Draft5forRegulatoryReview
Figure 32: Example layout of 7 Access Point clusters .................................................... 143
Figure 33: Fresnel zone .................................................................................................. 145
Figure 34: Variables for calculating angle of elevation (and depression) ........................ 146
Figure 35: Double-hop backhaul links ............................................................................. 147
Figure 36: Remote AP deployment ................................................................................. 148
Figure 37: Example 900-MHz remote AP behind 2.4-GHz SM ....................................... 150
Figure 38: Remote AP wired to SM that also serves a customer .................................... 151
Figure 39: Remote AP wired to SM that serves as a relay ............................................. 152
Figure 40: NAT Disabled implementation ....................................................................... 157
Figure 41: NAT with DHCP Client and DHCP Server implementation ............................ 158
Figure 42: NAT with DHCP Client implementation .......................................................... 159
Figure 43: NAT with DHCP Server implementation ........................................................ 160
Figure 44: NAT without DHCP implementation ............................................................... 161
Figure 45: Example of IP address in Class B subnet ...................................................... 162
Figure 46: Cyclone base cover, attached and detached ................................................. 178
Figure 47: Cyclone CMM2, bottom view ......................................................................... 180
Figure 48: Cluster Management Module micro ............................................................... 181
Figure 49: RJ-45 pinout for straight-through Ethernet cable ........................................... 183
Figure 50: RJ-45 pinout for crossover Ethernet cable ..................................................... 183
Figure 51: RJ-11 pinout for straight-through sync cable ................................................. 184
Figure 52: Quick Start tab of AP, example ...................................................................... 186
Figure 53: Radio Frequency Carrier tab of AP, example ................................................ 187
Figure 54: Synchronization tab of AP, example .............................................................. 188
Figure 55: LAN IP Address tab of AP, example .............................................................. 189
Figure 56: Review and Save Configuration tab of AP, example ..................................... 190
Figure 57: Time tab of AP, example ................................................................................ 191
Figure 58: Session Status tab data from AP, example ................................................... 193
Figure 59: Remote Subscribers tab of AP, example ....................................................... 197
Figure 60: General Status tab of SM, example ............................................................... 198
Figure 61: General Status tab of AP, example ................................................................ 202
Figure 62: Quick Start tab of BHM, example ................................................................... 206
Figure 63: Time tab of BHM, example ............................................................................ 208
Figure 64: Remote Subscribers tab of BHM, example .................................................... 210
Figure 65: General Status tab of BHS, example ............................................................. 211