User's Manual Part 1

Release8OverviewofCycloneNetworks



Issue2,November2007 Draft5forRegulatoryReview 115
7. Open the Configuration web page of the module.
8. Review parameter settings and enable the feature if you wish to do so at this
time (see next section).
end of procedure
10.2 ENABLINGFEATURES
A Cyclone feature is enabled (functioning) if the feature is both active and enabled. For
example, Transmit Frame Spreading is active (can be enabled) in any AP or BHM that
operates on Release 8. However, Transmit Frame Spreading functions only if the Enable
selection for the Transmit Frame Spreading parameter is checked in the Radio tab of
the Configuration web page in the module.