User's Manual Part 1

Release8OverviewofCycloneNetworks



Issue2,November2007 Draft5forRegulatoryReview 109
IP Interface Features
Module
Type(s) Controlled in GUI Page/Tab
SNMP
Control
Configurable LAN settings (IP address,
mask, gateway)
All radios Configuration/IP yes
Module's management IP address
assignable via DHCP
All radios Configuration/IP yes
Private LAN to support AP to SM (or BHM to
BHS) communications
All radios Configuration/IP yes
Configurable SM mgmt accessibility
(Local/Ethernet only, or Public/RF and
Local/Ethernet)
SM Configuration/IP yes
Security Features (Authentication,
Encryption, and Access Control)
Module
Type(s) Controlled in GUI Page/Tab
SNMP
Control
Configurable SM authentication using
BAM/PrizmEMS
AP SM Configuration/Security yes
Configurable BH authentication, standalone BHM BHS Configuration/Security no
DES encryption on standard product All radios no yes
AES encryption on AES product All radios no yes
Configurable whether SM/BHS displays
AP/BHM beacon information
AP BHM Configuration/Security yes
Configurable web, telnet, and ftp session
timeout
All radios Configuration/Security yes
Configurable access to radio management -
up to 3 source IP addresses
All radios Configuration/Security yes
User/account names (up to 4) and
passwords on modules
All radios Account yes
Permission levels control ability to add/delete
users/passwords
All radios Account yes
Override plug to override lost IP address or
user/password
All radios no no
Override plug configurable as a default plug -
reset to factory defaults
AP SM
BHM BHS
Configuration/Unit Settings yes
Override switch to override lost IP address or
user/password on CMM
CMMmicro no no