User's Manual Part 1

Release8OverviewofCycloneNetworks



Issue2,November2007 Draft5forRegulatoryReview 108
RF Configuration Features
Module
Type(s) Controlled in GUI Page/Tab
SNMP
Control
Configurable center-channel carrier
frequency
AP BHM Configuration/Radio yes
255 configurable "color codes" to manage
SM to AP (or (BHS to BHM) registration
All radios Configuration/Radio yes
16 configurable "sector IDs" for
administrative convenience
AP BHM Configuration/Radio yes
Configurable range settings (determines air
turn-around time)
AP Configuration/Radio yes
Configurable downlink data % (determines
transmit/receive ratio)
AP BHM Configuration/Radio yes
Configurable number of reserved control
slots (manages contention for uplink
requests)
AP Configuration/Radio yes
Configurable frequency scan list at SM SM BHS Configuration/Radio yes
Packet stats - RF interface All radios Statistics/Radio yes
Timing Features
Module
Type(s) Controlled in GUI Page/Tab
SNMP
Control
Configurable AP/BHM sync source - Sync
over Power over Ethernet, self-sync, or sync
cable
AP BHM Configuration/General yes
"Remote AP" support, including timing pulse
propagation through SM/BHS
SM BHS Configuration/General yes
Ethernet Interface Features
Module
Type(s) Controlled in GUI Page/Tab
SNMP
Control
Selectable link speeds - 10/100 Base T, half,
full-duplex
All modules Configuration/General yes
Ethernet link auto-negotiation All modules Configuration/General no
Accepts straight-through or crossover
Ethernet cable wiring (Auto-MDX)
All modules no no
Wire line Interface: Ethernet cable with
proprietary PoE
All modules no no
Disable SM Ethernet link SM Configuration/General yes
Packet stats - Ethernet interface All radios Statistics/Ethernet yes