User's Manual Part 1

Release8OverviewofCycloneNetworks

Issue2,November2007 Draft5forRegulatoryReview 107
10 ACCESSINGFEATURES
Cyclone Release 8 networks support the features that are indicated in Table 26.
Table 26: Cyclone features
Regulatory Features
Module
Type(s) Controlled in GUI Page/Tab
SNMP
Control
RoHS compliant (EU “green” mandate) All modules no no
WEEE compliant All modules no no
Complies with Human RF exposure limits
(ETSI)
All radios no no
Radio Features
Module
Type(s) Controlled in GUI Page/Tab
SNMP
Control
Time Division Duplex All radios no no
Scalable up to 6 sectors per cell. AP SM no no
200 registered subscribers supported per AP AP SM no no
Fixed /nomadic operation All radios no no
20 ms or less round trip latency (OTA with
Cyclone MAC, under normal conditions)
All radios no no
Transmit frame spreading for geographical
area co-existence
AP BHM Configuration/Radio yes
Radio statistics (scheduler) All radios Statistics/Scheduler yes
2X rate, enabled per link (requires
Advantage AP or 20 Mbps BH)
SM BHS Configuration/General yes
2X rate, enabled per sector (requires
Advantage AP or 20 Mbps BH )
AP BHM Configuration/General yes
Manual transmit power control - normal and
low (-18 dB)
All radios Configuration/Radio yes
Manual transmit power control, 1 dB
increments over 25 dB at the AP
AP BHM Configuration/Radio yes