Third Party Verification Claim

ManualsBrandsCASAINC ManualsBath3-Spray Pattern 12 in. Wall Mount Shower System Shower Head and Functional Handheld, Chrome (Valve Included)

Page 1 of 9

All testing and sample preparation for this report was performed under the continuous, direct supervision of IAPMO R&T Lab, unless otherwise stated. The statement

of compliance is based on the test results compared to the standard specifications without considering measurement uncertainty. The observations, test results and

conclusions in this report apply only to the specific samples tested and are not indicative of the quality or performance of similar or identical products. Only the Client

shown above is authorized to copy or distribute the report, and then only in its entirety. If presented with a copy of a Test Report without the IAPMO R&T Lab

watermark background, contact IAPMO R&T Lab for verification. Any use of the IAPMO R&T Lab name for the sale or advertisement of the tested material, product or

service is prohibited absent the advance written consent of IAPMO R&T Lab.

Report Number: 3173-22005

Report Issued: September 20, 2022 Project No.: 39112

Client: MM CASA INC

6681 COLORADO BLVD,

COMMERCE CITY, CO, 80022,

UNITED STATES

Source of Samples: The samples were sent by Manufacturer and received by IAPMO R&T Lab in

good condition on September 1, 2022.

Date of Testing: September 7, 2022

Sample Description: Bathtub faucets and showerheads

Models: See pages 2 to 6 for details.

Scope of Testing: The purpose of the testing was to determine if the samples tested of the

Bathtub faucets and showerheads met the requirements of California Appliance

Efficiency Regulations [when tested in accordance with 10 C.F.R. Section

430.23(t) Appendix S to Subpart B of part 430) for maximum flow rate and

Section 5.12 of ASME A112.18.1-2012/CSA B125.1-2012 for minimum flow

rate].

Conclusion: The samples tested of the Bathtub faucets and showerheads, models shown above, from

MM CASA INC COMPLIED with the requirements of California Appliance Efficiency Regulations

[when tested in accordance with 10 C.F.R. Section 430.23(t) (Appendix S to Subpart B of part 430)

for maximum flow rate and Section 5.12 of ASME A112.18.1-2012/CSA B125.1-2012 for minimum

flow rate].

Tested by, Reviewed by,

Vincent (Tengfei) Xiong, Technician Xicheng Xiong, Executive Vice-GM

Summary of content (9 pages)

PAGE 1
Report Number: 3173-22005 Report Issued: September 20, 2022 Client: MM CASA INC 6681 COLORADO BLVD, COMMERCE CITY, CO, 80022, UNITED STATES Source of Samples: The samples were sent by Manufacturer and received by IAPMO R&T Lab in good condition on September 1, 2022. Date of Testing: September 7, 2022 Sample Description: Bathtub faucets and showerheads Project No.: 39112 Models: See pages 2 to 6 for details.
PAGE 2
Model list: Item Photo Model Number Remark 1 DB-W93102H-10 Tested 2 DB-W93102H-12 Covered by DB-W93102H-10 3 WF-W98C02CP-10 Tested 4 WF-W98C02H-10 Covered by WF-W98C02CP-10 5 WF-W98C02BN-10 Covered by WF-W98C02CP-10 6 DB-98102LSJ-10 Covered by WF-W98C02CP-10 7 WFW98102CP-12 Covered by WF-W98C02CP-10 8 WF-W98102H-12 Covered by WF-W98C02CP-10 Report No.
PAGE 3
9 WF-W98102BN-12 Covered by WF-W98C02CP-10 10 WF-W98C02LSJ-12 Covered by WF-W98C02CP-10 11 WF-W98102CP-10 Covered by DB-98102LSJ-10 12 WFW98102H Covered by DB-98102LSJ-10 13 WFW98102BN-10 Covered by DB-98102LSJ-10 14 DB-98102LSJ-10 Tested 15 WF-W98102CP-12 Covered by DB-98102LSJ-10 16 WFW98102H-12 Covered by DB-98102LSJ-10 Report No.
PAGE 4
17 WFW98102BN-12 Covered by DB-98102LSJ-10 18 WF-W98W02LSJ-12 Covered by DB-98102LSJ-10 19 WF-W98103CP Covered by WF-W98103H 20 WF-W98103H Tested 21 WF-W98103BN Covered by WF-W98103H 22 DB-98103LSJ-10 Covered by WF-W98103H 23 WF-W98103CP-12 Covered by WF-W98103H 24 WF-W98103H-12 Covered by WF-W98103H Report No.
PAGE 5
25 WF-W98103BN-12 Covered by WF-W98103H 26 WF-W98W03LSJ-12 Covered by WF-W98103H 27 WF-W98C03CP-10 Covered by WF-W98103H 28 WF-W98C03H-10 Covered by WF-W98103H 29 WF-W98C03BN-10 Covered by WF-W98103H 30 WF-W98C03LSJ-10 Covered by WF-W98103H 31 WF-W98C03CP-12 Covered by WF-W98103H 32 WF-W98C03H-12 Covered by WF-W98103H Report No.
PAGE 6
33 WF-W98C03BN-12 Covered by WF-W98103H 34 WF-W98C03LSJ-12 Covered by WF-W98103H Report No.
PAGE 7
Primary Regulation: California Appliance Efficiency Regulations Test Results: All tests and evaluations were conducted per the written procedures specified in the Regulation and its reference standard. California Appliance Efficiency Regulations Section 1605.3 (h) Plumbing Fittings (1) Tub Spout Diverters – COMPLIED The leakage rate of the tub spout diverter was not greater than the applicable values shown in Table H-3 when tested in accordance with Sections 5.3.6 and 5.6.1.5 of ASME A112.18.
PAGE 8
Section 1607 Marking of Appliances (b) Name, Model Number and Date – COMPLIED The product or its package [per Section 1607(c) (1)] shall be permanently, legibly, and conspicuously marked with the following information on an accessible place: (1) Manufacturer’s name or brand name or trademark; (2) Model number; and (3) Date of manufacture, indicating (i) year and (ii) month or smaller (e.g. week) increment.
PAGE 9
Photographs of Samples Tested: WF-W98103H DB-W93102H-10 DB-98102LSJ-10 Report No.