+ INSTALLATION CONDITION 1.Refer to the {Standard Part List) when unpacking , check all parts available 2. Da not disassemble mixer body by yourself. 3.Connect inlet hoses to supply valves. 4. Make sure inlet pipes and supply valves have been installed and cleaned, also ensure no impurities in pipeline. 5.After installation , check all joints for visages. 6.Suggest don't fit the faucet in the several corrosive environments.
Or Foiling Shower arm PRODUCT LIST Model:6066.8 Me. Paris nam Qly Mo.
# INSTALLATION SHOWER SET SIZE Over Head shower Unity Sin Precise eer fn above Jor height Se dimensions of shower nationalist, LSS / z ¢ INSTALLATION DEPTH OF SHOWER ARM &SHOWER HOLDER 3 Bun G12 USA: 114 NPT Tartan 17018 NET Europe G2 Ki File wall Uh B20 NPT Canada E14 NPT Europe: G1 The installation depth of shower arm &shawsrhwidee can overt B21 8mm} #0 the thickness of Site must be calculated before installation Fae of plaster guard should be Obtrusion finish Walt ling
+ INSTALLATION DEPTH OF MAIN BODY min This part can be out, sa font wary ati the prominent die after sealing he wall, TERENCE 348 EE mem ay 108 175mm fi in dis hay or wou lodge thickness of valve 348" 88mg, 1 Including the thickness of overran | sie bh thickness of Ble rust be collated before titillation, & Installation Main body depth not less then 28 diminution and not more than 546° (88mm) Max, Otherwise, the panel bracero espaliered, « WALL COUNTERINTELLIGENCE MOUNTED INSTALLATION BEFORE TILING Recommen
« MAIN BODY CONNECTING PIPE SCHEMATIC DIAGRAM {3 Housewarming install hot water and cold water net strictly as instructions. waiter rik pips Hat water tat pipe 1.A5 shown ir the figures, the inlet snd cutie] pipes sre per-buried, pay intention 0 Ihe cor taut direction of Installing he per-tutied HK and make sure that the mark TOF on the top of tha installation bo is facing upward natal the bot and cold water inlet pipes.
« CARE AND MAINTENANCE in order to keep the mixer surface bright, please clean the mixer regularly. Rinse faucet with clean water and wipe with spit cotton cloth, Avoid suing cleaning powder, harsh cleaning chemicals, brushes,and cloth with coarse surface to prevent scratching and corrosion. Do not use acid cleaner to clean the faucet as may cause surface corrosion of the faucet H the faucet comes into contact with harmful acid substances, please rinse it with water immediately.
