Specification

Pop Up Drain Installation Guidence:
B
E
Step3
D
E
Remove C,D and E from B, apply the silicone to
underside of flange as shown. Insert B into sink hole;
Step4
Step5
Follow step 2 and 3 to install D, E onto B (C is no need in
this process), if there is any further issue, please feel free to
contact us ([e-mail]) for help.
Use a wrench to tighten the fasten nut (E).
A
A
B
C
D
E
B
C
D
E
Parts Sheet:
Filter
Drain Body
Small Gasket
Large Gasket
Fasten Nut
D
E
Remove parts D and E from the drain, insert B into the
basin hole, and then install D and E on B in sequence.
Step1
Step2
Tips:
1. The pop up drain is both suitable for the installation of basins
with and without overflow holes；
2. Make sure that the overflow hole of pop up drain is aligned
with the overflow hole of the basin when installation.
B
Check whether leakage happened here under the
basin sink; You need apply some silicone to prevent
leakage issue if there is leaksge under the basin sink,
Follow steps 4 and 5 to apply the silicone and
complete installation;
C
B