Warranty

Page 6
CYLINDER VALVE
PRESSURE
RELIEF VALVE
BLEED-OFF
VALVE
BLACK COUPLING NUT
REGULATOR
turn clockwise to connect
turn clockwise
to reseal
T
urn the cylinder valve on the tank clockwise to
close the propane tank. Attach the preassembled
regulator from the
Body
(
1
) to the cylinder valve by
turning the regulator coupling nut clockwise. Make
sure it is fastened securely and tighten
connections
by hand only.
Remove the rubber cap on the electronic igniter
(12) by unscrewing and slide battery (15) into the
battery slot. Make sure the positive side of the
battery faces outwards. Screw the electronic
igniter cap (11) over the battery tightly.
11
15
10
Check that the control knob (10) for the gas
supply system is turned to the “OFF” position
before starting any assembly.