B020 INSTALLATION INSTRUCTIONS
General information Please inspect the product immediately upon receipt for?possible?transit damage, missing packs/par ts or manufacturing?defects. Damage repor ted later?will not?be accepted. Please handle the product with care voiding knocks and shock loading to all sides and edges of the glass Note: Safety glass?(tempered glass)?can not be re-worked. .-Please read these instructions carefully before installation.
Digram Ref:S01 Ref:S04 Ref:S07 Ref:S10 Ref:S13 Ref:S16 Ref:S20 2 Ref:S02 Ref Ref:S03 Ref:S05 Ref:S08 Ref:S11 Ref:S14 Ref:S17 Ref:S06 Ref:S09 Ref:S12 Ref:S15 Ref:S18 Ref:S19 Description QTY S01 Aluminum top track 1 S02 Self drilling screws M4*10 4 S03 Glass door panel 2 S04 Self drilling screws ST4*30 4 S05 Expansion sleeve 6 S06 Aluminum wall frame 2 S07 Glass stopper 1 2 S08 Self drilling screws ST4*30 2 S09 Glass stopper 2 4 S10 Handle hole cap 1 S11
shower enclosure. To do so,measure the height. width, and depth of the shower enclosure and compare these measures to those of the door and panel. B.
Step 1 Position and level both wall frame on the edge of the shower base. Draw a line to mark the wall frame location with a pencil.
Step 2 Remove the wall channels and drill the holes at each mounting hole loaction Repeat on the other side. After drilling,insert wall anchors.
Step 3 Put the waterproof strip on the base. Replace the wall frames and secure to the walls with ST4*30 screws Repeat on the other side.
Step 4 Secure the glass stopper to the frame with M4*12 screws Repeat on the other side . .
Step 5 Put the top track on the wall frame .
Step 6 Secure the top track and waterproof strip to the wall frame by ST4*30 screw.
Step 7 10
Step 8 Secure the rollers to the glass by M5*12 screws. Install the guider on the waterproof strip. Put the glass in the top track and guider. 8.1 1 8.2 8.1 8.
Step 9 Secure the towel bar on the glass. Seal the wall frame and waterproof strip by silicone gun. 9. 1 9.2 9. 3 24 hours Allow 24 hours for silicone to dr y before use. Silicone?is to be applied?on the outside edge only.
THANK YOU FOR YOUR SUPPORT. We hope you enjoy using the product. If you have any other needs or questions, please feel free to contact us by email?info@exbriteusa.com, and get replies within 48 business hours.
