User manual

Location Environment

• Make sure that the machine is operated at a location temperature of 10 to 25° centigrade.

• The location must be dry. Air humidity must not be more than 80% and must not be condensing.

•Make sure that there is sufficient circulation of the air in order to prevent thermal buildup. Do not cover up the machine. If you mount the

machine in a rack make sure that any warm air can directly be released. Generally, the room temperature (e.g. in the rack) should not exceed 30°

Celsius.

• Do not set up the machine on carpeting, blankets, or the like. Do not set up the machine near curtains, etc., because this entails the

danger of blocking the ventilation ducts on the machine.

• Do not set up the machine near heating or the like, and not in locations that are overly dusty, affected by direct sunlight, mechanical vibra-

tions, or where the machine can be knocked.

• The machine should be in a horizontal position when being operated. Do not set up the machine on an incline.

• Keep the machine at a distance from devices that emit a strong magnetic field (microwave ovens, large loudspeakers).

Proper waste disposal of this product (regulation of electronic device disposal):

(Applies to countries of the European Union and other countries with similar waste collection systems)

Please dispose of this device separately from other waste in order to prevent damage to the environment or human health by

uncontrolled waste disposal. Recycle the device to allow for lasting recycling of recourses.

Private users should contact the dealer they purchased the product from or contact the responsible public authorities to find

out how to dispose the product in an environment-friendly way. Industrial or commercial users should contact their suppliers

and check the terms and conditions of the purchase contract. This product may not be disposed together with other

commercial waste.

Casablanca

All product names mentioned are registered trademarks of the corresponding firms. This document is protected by copyright. Any change, copy,

translation, or distribution without prior permission of the author is prohibited.

No liability is assumed for information in this document. We reserve the right to make technical changes.

FCC Class A Compliance Statement (Claro, Prestige, Prestige PLUS, Kron,

Kron PLUS, Gymnos)

This device complies with part 15 of the FCC Rules and meets all requirements of the Canadian Interference-Causing-

Equipment Regulations (ICES-003). Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

The following statement applies to the products covered in this manual, unless otherwise specified herein. The statement for

other products will appear in the accompanying documentation.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of

the FCC Rules and the Canadian Interference-Causing Equipment Standard ICES-003 for digital apparatus. These limits

are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/T.V. technician for help.