CONTENTS PRECAUTIONS PREFACE NAMES AND FUNCTIONS INSTALLATIONS OPERATIONS 4 6 6 8 9 1. Power Source 2. General Weighing 3. Weighing with Tare 4. HOLD Function 5. Auto Power Off 6.
PRECAUTIONS Make sure that you plug your scale into the proper power outlet. Plug into a power outlet 30 minutes before operations. Place the scale on a flat and stable surface. Do not subject the scale to sudden temperature changes. Do not subject the platter to sudden shocks. This scale must be installed in a dry and liquid free environment.
If the scale is not properly level, please adjust the 4 legs at the bottom of the scale (turn legs clockwise or counterclockwise) so as to center the bubble of the leveling gauge inside the indicated circle. Leveling gauge Keep the scale away from strong EMI noises may cause incorrect weight readings.
PREFACE Thank you for purchasing our CAS DL series. These series have been designed with CAS reliability, under rigid quality control and with outstanding performance. Your specialty departments can enjoy these high quality reliable CAS products. We believe that your needs will be satisfied and you will have reliability. This manual will help you with proper operation and care of the DL series. Please keep this handy for future reference.
DISPLAY AND KEYBOARD ZERO TARE HI GO LO CAL LB kg PCS ON OFF ZERO TARE HOLD ON OFF ZERO TARE HOLD INC SET MODE KEY FUNCTIONS KEYS DESCRIPTIONS ON OFF Turn on or off the display. ZERO Used to set the zero point. TARE Used to enter a tare weight and used to cancel a tare weight. HOLD If the weight is not stable, the display shows the average weight.
INSTALLATIONS 1. Insert and fasten the bracket support assembly screws. 2. Connect the load cell wire and power line to head. 3. Insert the support cover into the support. 4. Insert and fasten the screws.
OPERATIONS 1. Power Source USING BATTERIES Prepare six pieces of DC 1.5V(CM) batteries. Open the cover in the back of the scale and insert the batteries as shown in Fig.1. Close the cover and press the ON/OFF key then the scale is on. If you have low battery, the display shows “Err-5” as Fig.2 and the scale is off automatically. + - + - + - - + - - + + Fig.1 Fig.2 USING ADAPTOR - + Convert switch to AC 110V or 220V. Use only adaptor DC 9V/300mA.
3. Weighing with TARE Tare is the weight of container being used for a commodity. The TARE key subtracts the weight of the container. TARE ZERO TARE kg kg ON OFF Place a container on the platter. ZERO TARE ZERO TARE HOLD Press the TARE key. Place a commodity in the container. ZERO kg kg ON OFF Remove the commodity and container from the platter. ZERO TARE HOLD Press the TARE key. 4. HOLD Function When the weight is not stable, press the HOLD key.
5. Auto Power Off Auto-Power off function lengthen the battery life. When you don’t operate the scale, this function makes the power OFF automatically. Turn off the scale. While pressing the ZERO key, press the ON/OFF key then you will see the display below. Auto power off function set Initial display Auto power off function reset While pressing the ON/OFF key, press the ZERO key to change the function. If you want to use this function, set to YES.
KEY FUNCTIONS KEYS DESCRIPTIONS HOLD INC When the weight is not stable, the display will show average weight. Used to increase the number to enter the limit value. SET Used to save the limit value and select the mode. MODE Used to change the mode. How to Change Mode If you want to use counting mode, press the MODE key until the display shows “tyPE4” and then press the SET key.
Limit Mode You have to set the high value and low value to use this limit function. How to set the limit HI kg Change the mode to limit mode(kg) and press the SET key, then you will see the previous high limit value. HI kg If the high limit value is 100kg, press the INC key to increase the number and press the MODE key to enter the next number. LO kg Press the SET key to enter the low value, then you will see the previous low limit value. LO kg Enter the low limit value(30kg).
ERROR MESSAGES kg This is the error of the initial zero range. Set the platter empty and turn on the power. kg This is an overload. Refer to SPECIFICATIONS. SPECIFICATIONS DL-30 DL-60 DL-100 DL-150 DL-200 MAX. CAPACITY 30kg 60kg 100kg 150kg 200kg MIN. CAPACITY 10g 20g 50g 50g 100g -30kg -60kg -99.95kg -99.95kg -200kg MODEL MAX. TARE DISPLAY LCD 5 DIGIT POWER SOURCE DC 9V/300mA POWER CONSUMPTION APPROX. 0.
The method of connecting antistatic grounding wire. Fig.4 Grounded from its support as Fig.4.
