Owner`s manual

SETUP MENU
See below for instructions on changing the EDID channel. The default setting is HDMI
output 2.
SETUP MENU  ADVANCED SETTING  EDID CHANNEL
Also refer to the SOUND OPTIONS section of this manual.
• Press MENU on the remote to begin the SETUP MENU.
• Press the button until ADVANCED SETTING appears, then press the button.
• Press the button to find EDID CHANNEL, and then press the button.
• Use the and  buttons to find the desired EDID audio data mode from the
choices below, then press ENTER:
HDMI 1
HDMI 2
• Press the button until RETURN appears, and then either press ENTER to go
back to the ADVANCE SETTING menu or press EXIT to leave the SETUP
MENU completely.
RESTORE DEFAULT
SETUP MENU  RESTORE DEFAULT
• Press MENU on the remote to begin the SETUP MENU.
• Press the button until RESTORE DEFAULT appears, then press the button.
• Press the button to find RESTORE DEFAULT, then press ENTER.
• Use the and buttons to confirm (yes or no) whether you want to restore the
default settings, and then press ENTER.
• Press EXIT to leave the SETUP MENU.
EXIT MENU
SETUP MENU  EXIT MENU
• Press MENU on the remote to begin the SETUP MENU.
• Press the button until EXIT MENU appears, and then press ENTER to leave the
SETUP MENU.
33