Owner`s manual
SETUP MENU
M. UPDATE
SETUP MENU
ADVANCED SETTING
UPDATE
•
Press MENU on the remote to begin the SETUP MENU.
•
Press the button until ADVANCED SETTING appears, then press the button.
•
Press the button to find UPDATE, and then press the button.
•
Use the and
buttons
to find the desired chipset to use with the FW update
from the choices below, then press ENTER:
ARM
GENS
•
When the FW update is complete, unplug the power cable to turn off the Cinema
11v.
N. EDID CHANNEL
EDID stands for Extended Display Information Data. EDID data exchange is a
standardized means for a display to communicate its capabilities to a source
device
( such as the Cinema 11a and Cinema 11v ). The premise of this communication is
for the display to relay its operational characteristics, such as native resolution, to
the attached source, and then allow the source to generate the necessary video
characteristics to match the needs of the display. This maximizes
the functional compatibility between devices without requiring a user to configure
them manually, thus reducing the potential for incorrect settings and adjustments
that could compromise the quality of the displayed images and overall reliability of
the system.
As an example, when a DVD player is powered on, it reads the EDID from an
attached HDTV. The HDTV will have in its EDID contents that it is a Samsung
17" LCD panel that supports a native resolution of 1280x1024 pixels, but can also
support 480p, 720p, and 1080i video modes. The EDID may also say that the TV
is
a HDMI device and has two speakers. The DVD player would compare this
information with what it can put out of the HDMI port, then set itself to send
1080i with two channel stereo to the HDTV.
Within the HDMI format, there is a video EDID and an audio EDID. Since the
Cinema 11v has two separate HDMI outputs, the user must choose which HDMI
output will be used as the EDID output. For example, if you connect the Cinema
11v to the Cinema 11a ( or to any audio/video processor ) by HDMI 2, then the
EDID must be set to HDMI 2. This setting will allow the video and audio to pass
the signals. Please also see the CONNECTIONS section of this manual for more
information on connection configurations and the EDID channel.
32