Owner`s manual

SETUP MENU
• Press MENU on the remote to begin the SETUP MENU.
• Press the button until ADVANCED SETTING appears, and then press the 
button.
• Press the button to find PIP - PBP, and then press the button.
• Press the and  buttons to find the desired input of sub picture, and then press
ENTER.
• Press the button until RETURN appears, and then press ENTER to make more
changes in the ADVANCED SETTING menu. (Press EXIT to leave the SETUP
MENU completely.)
• NOTE: Sub Picture cannot be set to another HDMI input if the main picture
source is also an HDMI input.
I. 3D COMB FILTER
SETUP MENU  ADVANCED SETTING  3D COMB FILTER
• Press MENU on the remote to begin the SETUP MENU.
• Press the button until ADVANCED SETTING appears, then press the button.
• Press the button to find 3D COMB FILTER, and then press the button.
• Using the and  buttons, toggle the 3D comb filter setting to ON or OFF as
desired, then press ENTER.
• Press the button until RETURN appears, and then press ENTER to make more
changes in the ADVANCED SETTING menu. (Press EXIT to leave the SETUP
MENU completely.)
J. TRUE LIFE
SETUP MENU  ADVANCED SETTING  TRUE LIFE
• Press MENU on the remote to begin the SETUP MENU.
• Press the button until ADVANCED SETTING appears, then press the button.
• Press the button to find TRUE LIFE, and then press the button.
• Press the and  buttons to find the desired true life mode from the choices
below, and then press ENTER:
30