Owner`s manual

SETUP MENU
• Press the button until TEST PATTERNS appears, and then press the button.
• Press the and  buttons to find the desired test pattern mode from the choices
below, then press ENTER
Off
Multiburst (V)
Multiburst (H)
Cross Hatch 1
B/W long checked 1
B/W long checked 2
B/W long checked 3
B/W long checked 4
3D checked
Color Bars
• Press the button to return to the TEST PATTERNS menu.
• Press the button to return to the main SETUP MENU to make further changes,
or press EXIT to leave the SETUP MENU completely.
ADVANCED SETTINGS
SETUP MENU  ADVANCED SETTINGS
A. PASSWORD
SETUP MENU  ADVANCED SETTING  PASSWORD
• Press MENU on the remote to begin the SETUP MENU.
• Press the button until ADVANCED SETTINGS appears, then press the button.
• Press the button to find PASSWORD, and then press the button.
• Press the button to find PASSWORD MODE, and then press the button.
• Using the and  buttons, toggle the PASSWORD MODE setting to ON or OFF
as desired, then press ENTER.
• Press the button until CHANGE PASSWORD appears, then press ENTER.
• When prompted, key in the old password using the number pad on the remote. The
factory default password is 1111.
• When prompted, key in a new four-digit password.
26