Owner`s manual

SETUP MENU
Contrast – Video Contrast works by adjusting the level of white. Contrast is
complimentary to the Brightness control. The settings for this control are –50 to
+50. The default setting is 0.
Saturation – Saturation refers to the mix of “color” vs. “brightness” in the
picture. Increasing the Saturation makes colors more vivid. Decreasing the
Saturation makes colors look washed out. Changes to either Brightness or
Contrast can change the Saturation. This control can be used to balance the mix of color
vs. brightness. The settings for this control are –50 to +50. The default setting is 0.
Sharpness – Adjusts the “crispness” of the image on the screen. The settings for this
control are –12 to +12. The default setting is 0.
Hue – Adjustment that shifts the shade of color. Sometimes Hue is called tint.
This color control changes color without changing Luminance (picture brightness) or color
saturation. The settings for this control are –50 to +50. The default setting is 0.
Red Gain - Adjusts the red color level. The settings for this control are –50 to
+50. The default setting is 0.
Green Gain - Adjusts the green color level. The settings for this control are –50 to
+50. The default setting is 0.
Blue Gain - Adjusts the blue color level. The settings for this control are –50 to
+50. The default setting is 0.
Gamma – Gamma control adjusts the picture gray level. The settings for this control
are 0 to 5. The default setting is 5.
Use thebutton to navigate to the desired option, then press ENTER; change the settings
to the desired levels. For illustration purposes, these instructions will continue with the
BRIGHTNESS option, but the steps are the same for all of the PICTURE CONTROL menu
options.
• Press thebutton to find the BRIGHTNESS setting menu.
• Use the  and buttons to adjust the level of brightness.
• Press the button to return to the BRIGHTNESS setting menu.
• Press the button to find RETURN, and then press ENTER to go back to the
PICTURE CONTROL menu.
• Repeat this process to adjust settings as desired. After the adjustments are made, press
the button to find RETURN, then press ENTER to go to the SETUP MENU and
continue the system setup process. (Press EXIT to leave the SETUP MENU completely.)
22