Owner`s manual

SETUP MENU
• After assigning all of the video inputs, press thebutton to select RETURN, and then
press ENTER to go back to the previous SETUP MENU to continue through the system
setup process. (Press EXIT to leave the SETUP MENU completely.)
C. ASSIGN AUDIO INPUTS
SETUP MENU  INPUT ASSIGN  ASSIGNED AUDIO INPUTS
• Press MENU on the remote to use the SETUP MENU.
• Press thebutton until INPUT ASSIGN appears, then press the ENTER.
• Press the button to select an INPUT CHANNEL, then press ENTER.
• Press the button to select AUDIO ASSIGN, and then press the button.
• Press the button and button to find the desired type of audio input, then press
ENTER.
• Press the button on the remote to return to INPUT CHANNEL.
• Press the button until RETURN appears; this will display the other input channel
choices.
• Press the button until RETURN appears, then repeat these steps for other input
channels.
• After setting all of the audio inputs, press the button to select RETURN, and then press
ENTER to go back to the previous SETUP MENU to continue through the system setup
process. (Press EXIT to leave the SETUP MENU completely.)
D. PICTURE CONTROL
SETUP MENU INPUT ASSIGN PICTURE CONTROL
• Press MENU on the remote to begin the SETUP MENU.
• Press thebutton until the INPUT ASSIGN menu is displayed, then press thebutton.
• Press the button to select INPUT CHANNELS, and then press ENTER.
• Press the buttons to select the PICTURE CONTROL menu and press ENTER.
PICTURE CONTROL menu options are as follows:
Brightness – Video brightness controls work by changing the level of the black. The
Brightness control is complimentary to the contrast control. The settings for this control
are –50 to +50. The default setting is 0.
21